Flagship model with largest US install base — best parts availability of any Segway dirt bike. 74V system, #420 chain, 14T front / 58T rear sprocket (OEM). Top speed ~47 mph stock, unlockable to ~62 mph via app. Hydraulic disc brakes — 4-piston, Shimano H03C compatible. Verify mineral oil vs. DOT before brake service. 21" front / 18" rear wheels. Parts widely available across US retailers. Heavily overlaps with Sur-Ron Light Bee X ecosystem in wheel/tire sizing.
55 parts across 9 categories
6 parts

Skid Plate
Bottom protection for motor and battery. Fitment varies between X260 and Xaber 300 platforms — confirm before ordering. Aluminum recommended over plastic for rocky terrain.
$173.99
$69–$99

Skid Plates
SXS UHMW 1/4" skid plate. Lighter and stronger than aluminum — slides over obstacles instead of catching. Very impact resistant, extremely difficult to break. Fits aftermarket controllers on Sur-Ron. Note: Some Talaria aftermarket controllers may not fit (BAC8000 rubs; EBMX X-9000 fits).
$167.99
Select Surron Light Bee variant. Talaria and Segway variants same price.

Front Fender
X260 front fender. Available in OEM color variants. Not compatible with X160 (different fork diameter and wheel size) or Xaber 300 (different bodywork).
$23.99
$27–$39 estimated

Rear Fender
X260 rear fender. Common crash damage item. Available in OEM colors.
$99.99
$24–$35 estimated

Side Panels / Plastics
X260 side shrouds/panels. Popular crash replacement. Available in OEM color options. Sold individually or as set — specify when ordering.
$99.99
$39–$59 per panel, estimated

Skid Plate
Aluminum bash guard to protect motor and battery underside. Strongly recommended for trail and motocross use. Popular upgrade item.
$31.99
8 parts

Brake Pads
OEM part# 52191-YQ2A-0100. 4-piston hydraulic — compatible with Shimano H03C aftermarket pads. CRITICAL: verify brake fluid type (mineral oil vs. DOT) before servicing — do not mix. Most frequently replaced consumable on X260. Front and rear pads are the same part on most variants — verify before ordering.
$23.99

Brake Pads
Same OEM part# as front (52191-YQ2A-0100) — front and rear use the same pad. Shimano H03C aftermarket pads are a popular and widely available replacement.
$61.99

Brake Levers
Hydraulic lever set — sold as pair. Common crash damage item. Verify brake fluid type (mineral oil vs. DOT) before ordering — critical for seal compatibility.
$31.99

Brake Levers
Confirmed compatible with Segway X160 and X260. Drop-in replacement for OEM Tektro hydraulic levers.
$61.99
Multiple color options

Brake Fluid
CRITICAL: X260 uses Tektro hydraulic brakes requiring MINERAL OIL only. Do NOT use DOT fluid — it destroys the seals.
$13.99

Brake Rotor / Disc
OEM front rotor is 203mm, 6-bolt. Popular upgrade: 220mm with adapter. Verify rotor/caliper compatibility if upgrading. Not compatible with Xaber 300 (220mm OEM).
$184.99
$35–$49 estimated

Brake Rotor / Disc
OEM rear rotor is 180mm 6-bolt. Wear item — replace when minimum thickness is reached.
$136.99
$29–$39 estimated
Brake Caliper
OEM rear caliper part# 52290-YQ2A-0100. Common crash damage item. Verify mineral oil vs. DOT before refilling — do not contaminate the system.
Contact Dealer
7 parts

Grips
22mm bar diameter — standard dirt bike sizing. High-demand consumable. Many aftermarket options: ODI, ProTaper, Renthal Kevlar grips all fit the 22mm bars on all Segway models.
$18.99

Grips
Fits standard 22mm dirt bike handlebars on all Segway dirt bike models. Lock-on design preferred for off-road use.
$43.99

Foot Pegs
Wide platform footpegs. Verify mounting tab dimensions match Segway frame spec.
$193.99

Handlebars
31.8mm is the OEM clamp diameter for X260 — direct fit. Charged Cycle Works confirms X160/X260 fitment.
$55.99
White $95; other colors $87

Grips
ODI Ruffian half-waffle grips. Medium compound, closed end. Community top-seller — OEM grips are generic rubber. Available in 8 colors. Grip glue sold separately.
$16.99
Available in Black, Blue, Grey, Red, Fluorescent Green, Fluorescent Orange, Fluorescent Yellow, Pink

Foot Pegs
Warp9 7075-T6 forged aluminum foot pegs. Heat-forging process ensures superior strength vs. cast competitors. Extra wide 57x87mm platform with exclusive 'Y' bridge for 4 center teeth. Uses OEM pivot pin and spring. Lifetime warranty from Warp9. Note: Talaria-specific pegs are a different SKU.
$135.99
Available in Black, Red, Blue, Magnesium, Gold, Purple, Silver. White variant is $117.

Handlebars
22mm bar diameter, 28.6mm stem clamp. Common crash damage item. Popular aftermarket upgrades: ProTaper, Renthal, or Fasst Flexx for reduced vibration and rider comfort.
$107.99
$45–$65 estimated
10 parts

Chain
420 pitch non-sealed chain. OEM spec on Talaria Sting MX3 and MX4 (OEM link count: 100L). Segway X160/X260 also use 420 pitch and share aftermarket chain compatibility with Talaria Sting. Available in gold or natural steel. Sur-Ron Light Bee X/S OEM spec is 420 pitch (primary belt + 420 secondary chain). OEM link count: 106L for Light Bee X/S.
$75.99
Price varies by link length

Chain
PREMIUM UPGRADE over the 420 NZ3. DID's X-ring sealed 420 chain for Sur-Ron Light Bee X, Talaria Sting, and Segway X260/X160 riders who want longer chain life and less re-lubrication. X-ring seals retain grease internally — chain life index ~2,200 vs. ~400-600 for the non-sealed NZ3. Sur-Ron LBX stock: 106L. Talaria Sting MX3/MX4: 104L. NOTE: X-ring chains require a press-fit connecting link — do NOT use a standard clip link from the NZ3. Seal wear indicator: replace when seals show cracking or chain stretch exceeds 3%% of measured length. Not compatible with Talaria MX5 Pro (418 pitch) or Sur-Ron Ultra Bee (428 pitch).
$88.99
Verify current pricing and stock on DID Direct website.

Chain
Essential consumable — always have spare connecting links. Replace connecting link every chain replacement. Clip (spring clip) type for DID 420 NZ3 non-ring chains. Do NOT use clip links on X-ring chains (VX series) — X-ring chains require a press-fit connecting link (420VXP). Sur-Ron LBX, Talaria Sting MX3/MX4, and Segway X160/X260 all use 420 NZ3 compatible clip links.
$4.28
$3.02 (Natural) / $3.35 (Gold) - RJ Clip Loose-fit
Chain
Required when rejoining a DID 420 VX chain after removal. X-ring connecting link includes x-ring seals and outer plate. Always replace the connecting link when re-installing an x-ring chain — never reuse a bent or removed connecting link. Compatible with Sur-Ron LBX, Talaria Sting MX3/MX4/Expert, Segway X160/X260 running the DID 420 VX chain.
Price unavailable

Chain
Stock chain specification for Sur-Ron Light Bee X and Light Bee S: 420 pitch, 106 links. CONFIRMED: Sur-Ron LBX uses 420 pitch — NOT 428 (a common misconception). Segway X260 and X160 also use 420 pitch and are compatible with the same chain. Segway manual specifies chain replacement at ~4,971 miles (8,000 km). 106L is correct for stock 14T front / 46T rear (Sur-Ron) or 14T/58T (Segway X260). If changing sprocket tooth counts, recalculate required link count. Duplicate entry of the general 420 NZ3 entry — this entry is spec-pinned for direct ordering. For sealed/premium upgrade, see DID 420 VX.
$75.99

Chain
IMPORTANT: Segway X260 and X160 use #420 chain — NOT #428 like Sur-Ron Light Bee. Per Segway manual, replace chain every ~4,971 miles (8,000 km). Always replace chain and sprockets together as a set.
$24.99

Front Sprocket
OEM front sprocket is 14T with #420 pitch — NOT #428. Per Segway manual, replace simultaneously with chain. Popular to swap tooth count for gearing changes — always verify #420 pitch on replacements.
$7.99
$15–$25 estimated

Rear Sprocket
OEM X260 rear sprocket is 58T — larger than Sur-Ron (46T) for different gearing. OEM part# 13204-YQ2A-0200. Aftermarket aluminum options available from Warp9 in multiple tooth counts. Replace with chain.
$52.99
Warp9 aftermarket

Motor
74V mid-drive motor for X260. Not compatible with X160 (different power class). Common upgrade path: higher-winding aftermarket motors for power increase.
$31.99
$499–$599 estimated

Chain
Full 420-pitch chain drive kit for X260. Marketed as the lightest 420 kit available. Also fits Sur-Ron LBX and E Ride Pro.
$123.99
6 parts

Throttle
Hall-sensor throttle. High-demand consumable — degrades with use and exposure. Many aftermarket options available for 22mm bars.
$48.99
$29–$45 estimated

Battery
74V Li-NMC pack. X260 only — not compatible with Xaber 300 (72V) or X160. High-value item; source from official Segway store or authorized dealers when possible.
$229.99

Charger
84V output for 74V pack (X260 and X160). Do NOT use on Xaber 300 (72V nominal — different charger). Common loss/damage item — popular aftermarket replacement.
$491.99

Controller / ESC
74V controller for X260. Common failure point in hard crash scenarios. Popular aftermarket tuned controllers (Votol, APT) available for power upgrades.
$847.99

Display / Dashboard
Shows speed, battery level, and ride mode. Pairs with Segway app for speed unlock and diagnostics. Verify X160 vs. X260 variant — may differ slightly.
$11.99
$79–$109 estimated

Lighting
Confirmed plug-and-play for X160/X260. Retains factory bracket. IP67 waterproof. Excellent value.
$40.99
2 parts

Seat Cover
Aftermarket seat cover for Segway X260 and Xaber 300. Verify fitment for X160 (smaller seat). Multiple grip textures and colors available.
$97.99
From $69

Seat
OEM seat for X260. Not compatible with X160 or Xaber 300. Aftermarket seat covers and gripper covers available as a popular upgrade.
$74.99
3 parts

Front Fork
X260 front fork. ~260mm travel, 21" wheel. Popular upgrade target: FastAce, RockShox, or DNM units. Verify axle diameter (15mm) and steerer diameter for aftermarket fitment.
$43.99
$249–$329 estimated

Rear Shock
OEM rear shock for X260. Popular upgrade: DNM, Marzocchi, or KYB units. Verify eye-to-eye length and mounting hardware before ordering aftermarket.
$173.99
Swingarm Bearings
Confirmed for X260 and Sur-Ron LBX (shared platform components). Bearing spec Z-6000-2Z.
Contact Dealer
1 part
12 parts

Front Tire
21" front tire — same sizing as Sur-Ron Light Bee X. OEM CST 70/100-21. Aftermarket Kenda, Shinko, or Maxxis Minion fit the same wheel size. High-wear consumable.
$49.99
$39–$59 estimated

Rear Tire
18" rear tire. OEM size 90/100-18. Same wheel diameter as Sur-Ron Light Bee X rear — some tire overlap. High-wear consumable, especially under aggressive off-road use.
$95.99
$45–$65 estimated

Front Tube
Standard 21" tube for X260 and Xaber 300 front wheel. Schrader valve. Inexpensive consumable — recommend stocking multiples.
$124.99
$10–$15

Rear Tube
Standard 18" tube for X260 and Xaber 300 rear wheel. Schrader valve. Same diameter as Sur-Ron Light Bee rear — some cross-compatibility.
$124.99
$10–$15
Front Tire
Standard 21" MX front tire for Segway X260 and Xaber 300. Dunlop MX34, Pirelli Scorpion MX, and Maxxis Maxxcross SI all fit this size.
Price unavailable
Rear Tire
Standard 18" rear tire for X260 and Xaber 300. Verify Xaber 300 OEM rear tire size before ordering — Xaber may differ.
Price unavailable

Front Tire
Confirmed: X260 front is 80/100-21 (not 70/100-21). No Maxxis MX tire comes in 70/100-21 — that size does not exist in their lineup. Maxxcross IT is a GNCC/WORCS-proven intermediate-to-hard terrain tire.
$89.99
80/100-21 listed as ready to ship

Front Tire
Premium Pirelli MX tire for X260 21" front. 90/100-21 also available at RevZilla for a wider contact patch.
$61.99
$49–$138 range; select 80/100-21

Rear Tire
Neither Maxxis nor Pirelli makes 90/100-18 for MX use — their 18" rear starts at 100/100-18. This is the standard premium aftermarket swap for the X260.
$54.99
Select 100/100-18 rear

Front Tube
21" front inner tube for X260 / Xaber 300.
$21.99

Rear Tube
18" rear inner tube for X260 / Xaber 300.
$15.99

Tires
#1 selling Sur-Ron tire of all time per Charged Cycle Works. Sticky rubber compound and versatile tread — excellent on pavement, hard-packed trails, and rocky terrain. DOT compliant. 2.75x19 is the perfect OEM rim fit for Sur-Ron Light Bee and Talaria Sting.
$65.99
Select 2.75x19 variant. Multiple sizes available for different bikes.